Material Safety Data Sheet (MSDS)
1. Identification of the Substance/Mixture and Company
Product Name: WILCO PRIME Oven Cleaner
Product Use: Degreaser for ovens and grills in HORECA kitchens
Supplier: WILCO PRIME
Address: Dubai, UAE
Emergency Contact:+971 50 899 0212
Website: store.wilcoprime.com
2. Hazards Identification
Classification (GHS):
- Skin Corrosion/Irritation: Category 1B
- Eye Damage/Irritation: Category 1
- Skin/Eye Irritation: Category 2
- Specific Target Organ Toxicity (Single Exposure): Category 3 (Respiratory irritation)
Label Elements:
Corrosive
Irritant
Signal Word: Danger
Hazard Statements:
- H314: Causes severe skin burns and eye damage
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
Precautionary Statements:
- P260: Do not breathe mist/vapors/spray
- P280: Wear protective gloves/protective clothing/eye protection
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing
3. Composition/Information on Ingredients
| Ingredient | Synonym | CAS Number | Concentration |
|---|---|---|---|
| Ethylenediaminetetraacetic Acid | EDTA | 60-00-4 | Proprietary |
| Alkyl Polyglucoside | Alkylpolyglucoside 80 | 68515-73-1 | Proprietary |
| 2-Butoxyethanol | Butyl Glycol | 111-76-2 | Proprietary |
| Sodium Hydroxide | Caustic Soda | 1310-73-2 | Proprietary |
| Sodium Metasilicate | - | 6834-92-0 | Proprietary |
| Potassium Hydroxide | Caustic Potash, KOH | 1310-58-3 | Proprietary |
Note: Exact concentrations are proprietary. The mixture is alkaline (pH 12-14) and solvent-based.
4. First-Aid Measures
Inhalation: Move to fresh air. If breathing is difficult, seek medical attention.
Skin Contact: Remove contaminated clothing. Rinse skin with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present. Seek immediate medical attention.
Ingestion: Do not induce vomiting. Rinse mouth and seek immediate medical attention.
5. Fire-Fighting Measures
Suitable Extinguishing Media: Dry chemical, carbon dioxide, foam, or water spray.
Unsuitable Extinguishing Media: None known.
Specific Hazards: May produce carbon oxides and irritating fumes when heated.
Protective Equipment: Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Personal Precautions: Wear protective equipment. Avoid breathing vapors.
Environmental Precautions: Prevent entry into waterways or sewers.
Cleanup Methods: Absorb with inert material (e.g., sand, vermiculite). Collect in suitable containers for disposal.
7. Handling and Storage
Handling: Use in well-ventilated areas. Avoid contact with skin, eyes, and clothing.
Storage: Store in a cool, dry, well-ventilated area away from acids and heat sources. Keep containers tightly closed.
Material Compatibility: Not recommended for use on aluminium metal due to potential corrosion.
8. Exposure Controls/Personal Protection
Exposure Limits:
- 2-Butoxyethanol: TWA 20 ppm (ACGIH)
- Sodium Hydroxide: Ceiling 2 mg/m³ (ACGIH)
- Potassium Hydroxide: Ceiling 2 mg/m³ (ACGIH)
- Sodium Metasilicate: No specific limits; use general dust control measures.
- EDTA, Alkyl Polyglucoside: No specific limits established.
Engineering Controls: Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment (PPE):
- Eyes: Safety goggles
- Skin: Chemical-resistant gloves (e.g., nitrile), protective clothing
- Respiratory: Use respiratory protection if ventilation is inadequate
9. Physical and Chemical Properties
| Property | Value |
|---|---|
| Appearance | Clear to slightly hazy liquid |
| Odor | Mild |
| pH | 12-14 (alkaline) |
| Boiling Point | Not determined |
| Flash Point | Not applicable |
| Solubility | Fully miscible in water |
| Density | ~1.0-1.1 g/cm³ |
10. Stability and Reactivity
Stability: Stable under recommended storage conditions.
Reactivity: May react with strong acids or oxidizing agents.
Incompatible Materials: Strong acids, oxidizing agents, aluminium.
Hazardous Decomposition Products: Carbon oxides, irritating fumes.
11. Toxicological Information
Acute Toxicity: Not classified as acutely toxic.
Skin Corrosion/Irritation: Causes severe burns and irritation.
Eye Damage: Causes serious eye damage and irritation.
Respiratory/Skin Sensitization: May cause respiratory irritation.
12. Ecological Information
Ecotoxicity: No specific data available. Avoid release into the environment.
Persistence/Degradability: Expected to be biodegradable (Alkyl Polyglucoside, 2-Butoxyethanol).
Bioaccumulation: Low potential.
13. Disposal Considerations
Disposal Methods: Dispose of in accordance with local regulations. Do not release into drains or the environment.
Contaminated Packaging: Dispose of as unused product.
14. Transport Information
UN Number: UN1760 (Corrosive Liquid, N.O.S.)
Proper Shipping Name: Corrosive Liquid, N.O.S. (Sodium Hydroxide, Potassium Hydroxide)
Transport Hazard Class: 8 (Corrosive)
Packing Group: II
15. Regulatory Information
Complies with UAE HORECA standards and GHS regulations. Check local regulations for specific requirements.
16. Other Information
Revision Date: April 17, 2025
Disclaimer: The information provided is based on our current knowledge and is intended for safety purposes. WILCO PRIME is not liable for misuse of the product.
Contact: For further information, contact WILCO PRIME at +971 50 899 0212 or visit store.wilcoprime.com.
